AC Drive China Forum
Forum » General Discussion » Looking for supplier stainless steel motors within Europe
Topics: Looking for supplier stainless steel motors within Europe on General Discussion
Start by
Steven Goddere
09-14-2013 04:07 PM

Looking for supplier stainless steel motors within Europe

Does anyone know where I can find stainless steel motors equipped for footmounting?

power range from 0,55kW to 18,5kW.
speed 1500rpm (4P)
Tension 400VAC-50hz
IE2 or higher (for P > 0,55kW)
Preferably IC410 (if not possible the alternative would be IC411)

Our preference goes out to European suppliers as these motors are to be used within Europe.
However, suppliers from outside Europe may be mentioned as well.

09-14-2013 06:47 PM
Top #2
Andy Turner
09-14-2013 06:47 PM
Hello Steve, SEW can offer stainless steel Geared Motors but only on smaller powers -
09-14-2013 09:38 PM
Top #3
Steven Godderé
09-14-2013 09:38 PM
Thank you Andy for your feedback.

For the smaller types, I've found several local suppliers who can provide me with import products from China. Powerratings up till 1,5kW.

The bigger motors are quite harder to find :-)
09-15-2013 12:16 AM
Top #4
Orit Altman-Nicholls
09-15-2013 12:16 AM
Hi Steve, you can contact Coel Motori in Italy. Ask for Mr. Moreno Mozzati he will be able to help you. As motor distributor and with experience in unique applications we will be happy to assist you should you have any questions.
Regards, Orit Altman
09-15-2013 02:23 AM
Top #5
Martin Kruithof
09-15-2013 02:23 AM
Hi steve, Indeed it is more easy to find Stainless steel motors were most of them are comming from China. But are you satisfied with the Chinees motors? Preformance is okay but they are not IP69k. If you need IP69k (Even directly high presure cleaning agains the output shaft of the motor) then we have the solution. Produced in The Netherlands and you can find more information at or contact me for more information. We can also deliver stainless steel motors upto 4kW (water cooled).
Kind regards,

Martin Kruithof (Eloctro ABI bv, The Netherlands)
09-15-2013 05:12 AM
Top #6
krishnavelu A B
09-15-2013 05:12 AM
Hey steve

i am from india. If your quantity is high we would like to develop your motor as per your requirement. if your mail be
09-15-2013 07:44 AM
Top #7
Nanchi Katakam
09-15-2013 07:44 AM
Is that stainless less motors means, only hardware and Conduit box Or more....because GE offers above mentioned features with IE3 efficiencies.
09-15-2013 10:05 AM
Top #8
Christophe DENAT
09-15-2013 10:05 AM
Hello Steven, you could find stainless motor with ABB. If you could interest feel free to contact me
09-15-2013 12:54 PM
Top #9
Jairo Muñiz
09-15-2013 12:54 PM
Contact ABB, just one question for you need a steel engine?.
Reply to Thread