AC Drive China Forum
Forum » PLC - Programmable Logic Controller » communication between simatic wincc 6.0 and s7-200 CPU 226
Topics: communication between simatic wincc 6.0 and s7-200 CPU 226 on PLC - Programmable Logic Controller
#1
Start by
sreedev puthanveettil
10-26-2013 10:58 AM

communication between simatic wincc 6.0 and s7-200 CPU 226

hi experts,
what are the possible methods to communicate between simatic wincc 6.0 and s7-200 CPU 226, if it is possible under which driver I can add the tags... Please help me..
10-26-2013 01:43 PM
Top #2
Peter S Grote
10-26-2013 01:43 PM
Hi, you can use a netLINK direct and use the IBHDriver in your WINCC. Funther info needed, just contact me and I will help you.
Have a nice day and good luck.
10-26-2013 04:27 PM
Top #3
Joel Hurley
10-26-2013 04:27 PM
NETLink PRO Compact from Helmholz will do the job. You can download a manual with examples for connections using RFC1006 protocol from our website. You will also find a local dealer on the website. Anyhow you can also get back to me if you feel like it.
Regards,
Reply to Thread